caustic soda inquiryPhosphoric Acid

Formula: H3PO4 in water
Other Name : Phosphoric Acid Technical Grade and Food Grade

Product
Name
Group
Code
Assay % Conc'n Packing Weight (kg) Container
Type
Phosphoric Acid PA 85% 35 Plastic Carbouys

Phosphoric Acid 85% min
Origins/ Source: China, Korea
Packaging : 35Kg in plastic carboys
Assay (H3PO4 in water) 85 % minimum
Chloride (Cl) 5 ppm. maximum
Sulphate as SO4 50 ppm maximum
Iron (Fe)  20 ppm maximum
For Industrial Use
  Types : Phosphoric Acid Tech Grade and Food Grade
  Appearance : Clear liquid

 

PHOSPHORIC ACID

phosphoric acid1. Product Identification

Synonyms: Ortho-phosphoric acid; white phosphoric acid
CAS No.: 7664-38-2
Molecular Weight: 98.00
Chemical Formula: H3PO4 in H2O
Product Codes:
PAF, PAT

 

2. Composition/Information on Ingredients


  Ingredient            CAS No         Percent        Hazardous                                  
  -------------------   ------------   ------------   ---------   
 
  Phosphoric Acid       7664-38-2        55 - 95%        Yes                                                                   
  Water                 7732-18-5         5 - 45%        No                                                                    
 
                    

3. Hazards Identification

Emergency Overview
--------------------------
DANGER! CORROSIVE. CAUSES SEVERE IRRITATION AND BURNS TO EVERY AREA OF CONTACT. HARMFUL IF SWALLOWED OR INHALED.

-
Health Rating: 3 - Severe
Flammability Rating: 0 - None
Reactivity Rating: 2 - Moderate
Contact Rating: 4 - Extreme (Corrosive)
Lab Protective Equip: GOGGLES & SHIELD; LAB COAT & APRON; VENT HOOD; PROPER GLOVES
Storage Color Code: White (Corrosive)

Potential Health Effects
----------------------------------

Inhalation:
Inhalation is not an expected hazard unless misted or heated to high temperatures. Mist or vapor inhalation can cause irritation to the nose, throat, and upper respiratory tract. Severe exposures can lead to a chemical pneumonitis.
Ingestion:
Corrosive. May cause sore throat, abdominal pain, nausea, and severe burns of the mouth, throat, and stomach. Severe exposures can lead to shock, circulatory collapse, and death.
Skin Contact:
Corrosive. May cause redness, pain, and severe skin burns.
Eye Contact:
Corrosive. May cause redness, pain, blurred vision, eye burns, and permanent eye damage.
Chronic Exposure:
No information found.
Aggravation of Pre-existing Conditions:
Persons with pre-existing skin disorders or eye problems, or impaired respiratory function may be more susceptible to the effects of the substance.

4. First Aid Measures

Inhalation:
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately.
Ingestion:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse.
Eye Contact:
Immediately flush eyes with gentle but large stream of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Call a physician immediately.

5. Fire Fighting Measures

Fire:
Not considered to be a fire hazard. Contact with most metals causes formation of flammable and explosive hydrogen gas.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire. Water spray may be used to keep fire exposed containers cool. If water is used, use in abundance to control heat and acid build-up.
Special Information:
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Contain and recover liquid when possible. Neutralize with alkaline material (soda ash, lime), then absorb with an inert material (e. g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust. Do not flush to sewer! US Regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities. The toll free number for the US Coast Guard National Response Center is (800) 424-8802.

7. Handling and Storage

Keep in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture, incompatibilities, and direct sunlight. Corrosive to mild steel. Store in rubber lined or 316 stainless steel designed for phosphoric acid. Do not wash out container and use it for other purposes. When diluting, the acid should always be added slowly to water and in small amounts. Never use hot water and never add water to the acid. Water added to acid can cause uncontrolled boiling and splashing. Protect from freezing. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
-OSHA Permissible Exposure Limit (PEL):
1 mg/m3 (TWA)

-ACGIH Threshold Limit Value (TLV):
1 mg/m3 (TWA), 3 mg/m3 (STEL)
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded, a full facepiece respirator with high efficiency dust/mist filter may be worn up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Physical data below refers to concentrated phosphoric acid.
Appearance:
Clear, colorless syrupy liquid.
Odor:
Odorless.
Solubility:
Miscible in all proportions in water.
Specific Gravity:
1.69 @ 25C
pH:
1.5 (0.1 N aqueous solution)
% Volatiles by volume @ 21C (70F):
100
Boiling Point:
158C (316F)
Melting Point:
21C (70F)
Vapor Density (Air=1):
3.4
Vapor Pressure (mm Hg):
0.03 @ 20C (68F)
Evaporation Rate (BuAc=1):
No information found.

10. Stability and Reactivity

Stability:
Stable under ordinary conditions of use and storage. Substance can supercool without crystallizing.
Hazardous Decomposition Products:
Phosphorus oxides may form when heated to decomposition.
Hazardous Polymerization:
Will not occur.
Incompatibilities:
Liberates explosive hydrogen gas when reacting with chlorides and stainless steel. Can react violently with sodium tetrahydroborate. Exothermic reactions with aldehydes, amines, amides, alcohols and glycols, azo-compounds, carbamates, esters, caustics, phenols and cresols, ketones, organophosphates, epoxides, explosives, combustible materials, unsaturated halides, and organic peroxides. phosphoric acid forms flammable gases with sulfides, mercaptans, cyanides and aldehydes. It also forms toxic fumes with cyanides, sulfide, fluorides, organic peroxides, and halogenated organics. Mixtures with nitromethane are explosive.
Conditions to Avoid:
Incompatibles.

11. Toxicological Information


Oral rat LD50: 1530 mg/kg; investigated as a mutagen.
  --------\Cancer Lists\---------------------------------------
                          ---NTP Carcinogen---
  Ingredient                   Known    Anticipated  IARC Category
  --------------------------   -----    -----------  -------------
  Phosphoric Acid (7664-38-2)   No          No          None
  Water (7732-18-5)             No          No          None
                    

12. Ecological Information

Environmental Fate:
When released into the soil, this material may leach into groundwater. When released to water, acidity may be readily reduced by natural water hardness minerals. The phosphate, however, may persist indefinitely.
Environmental Toxicity:
No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

14. Transport Information

Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: PHOSPHORIC ACID SOLUTION
Hazard Class: 8
UN/NA: UN1805
Packing Group: III
Information reported for product/size: 350LB

International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: PHOSPHORIC ACID SOLUTION
Hazard Class: 8
UN/NA: UN1805
Packing Group: III
Information reported for product/size: 350LB

16. Other Information

NFPA Ratings: Health: 3 Flammability: 0 Reactivity: 0
Label Hazard Warning:
DANGER! CORROSIVE. CAUSES SEVERE IRRITATION AND BURNS TO EVERY AREA OF CONTACT. HARMFUL IF SWALLOWED OR INHALED.
Label Precautions:
Do not get in eyes, on skin, or on clothing.
Keep container closed.
Use only with adequate ventilation.
Do not breathe vapor or mist.
Wash thoroughly after handling.
Label First Aid:
In case of contact, immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In all cases call a physician immediately.

References

  1. Wikipedia.com - Acetic Acid

  2. http://www.jtbaker.com - Acetic Acid MSDS

    Disclaimer:
    the information contained herein are written in good faith but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.